Delamination tolerance studies in laminated composite panels

Determination of levels of tolerance in delaminated composite panels is an important issue in composite structures technology. The primary intention is to analyse delaminated composite panels and estimate Strain Energy Release Rate (SERR) parameters at the delamination front to feed into acceptability criteria. Large deformation analysis is necessary to cater for excessive rotational deformations in the delaminated sublaminate. Modified Virtual Crack Closure Integral (MVCCI) is used to estimate all the three SERR components at the delamination front from the finite element output containing displacements, strains and stresses. The applied loading conditions are particularly critical and compressive loading on the panel could lead to buckling of the delaminated sublaminate and consequent growth of delamination. Numerical results are presented for circular delamination of various sizes and delamination at various interfaces (varying depth-wise location) between the base- and the sub-laminates. Numerical data are also presented on the effect of bi-axial loading and in particular on compressive loading in both directions. The results can be used to estimate delamination tolerance at various depths (or at various interfaces) in the laminate.     

Numerical Simulation of Flows in Cut-Throat Flumes

A numerical simulation is presented to obtain the flow characteristics of cut-throat flumes in rectangular open channels. Cut-throat flumes with a horizontal floor are used as simple devices for flow measurement in open channels. Since the flow in the throat section is highly three dimensional and curvilinear, the three-dimensional turbulence Reynolds stress model was applied in the present study to obtain the flow parameters such as the water surface profiles, the pressure distributions, and the mean velocity distributions. The volume of fluid scheme was used to determine the shape of the free surface by computing the fraction of each near-interface cell of a fixed grid that is partially filled with water. The previously published experimental data as well as data based on a new test related to cut-throat flumes were used to validate the simulation results.     

Effect of low‐dose irradiation on shelf life and microbiological safety of sliced carrot

Minimally processed non‐irradiated carrots (sliced) exhibited diverse microflora at initial level. During storage, bacterial number increased with the presence of pathogenic bacteria accompanied by a loss of total solids. On the other hand γ‐irradiation at an optimal dose of 2 kGy offered a pathogen‐free, hygienic product with insignificant losses in nutrients such as in sucrose, total carotenes and ascorbic acid content in comparison to controls and 2‐ to 4‐fold increased in shelf‐life at refrigeration temperature. The D₁₀ values of pathogens like Escherichia coli and Yersinia enterocolitica in carrot paste were in a lower range (0.12–0.26 kGy) compared with that of Listeria monocytogenes (0.3–0.5 kGy). The validity of the processing treatment (2 kGy) was challenged by artificially inoculating Listeria monocytogenes in the product. Thus, minimally processed carrots (sliced) are amenable to radiation treatment for extended storage stability and microbial safety. Copyright © 2005 Society of Chemical Industry     

Survivable lightpath provisioning in WDM mesh networks under shared path protection and signal quality constraints

This paper addresses the problem of survivable lightpath provisioning in wavelength-division-multiplexing (WDM) mesh networks, taking into consideration optical-layer protection and some realistic optical signal quality constraints. The investigated networks use sparsely placed optical-electrical-optical (O/E/O) modules for regeneration and wavelength conversion. Given a fixed network topology with a number of sparsely placed O/E/O modules and a set of connection requests, a pair of link-disjoint lightpaths is established for each connection. Due to physical impairments and wavelength continuity, both the working and protection lightpaths need to be regenerated at some intermediate nodes to overcome signal quality degradation and wavelength contention. In the present paper, resource-efficient provisioning solutions are achieved with the objective of maximizing resource sharing. The authors propose a resource-sharing scheme that supports three kinds of resource-sharing scenarios, including a conventional wavelength-link sharing scenario, which shares wavelength links between protection lightpaths, and two new scenarios, which share O/E/O modules between protection lightpaths and between working and protection lightpaths. An integer linear programming (ILP)-based solution approach is used to find optimal solutions. The authors also propose a local optimization heuristic approach and a tabu search heuristic approach to solve this problem for real-world, large mesh networks. Numerical results show that our solution approaches work well under a variety of network settings and achieves a high level of resource-sharing rates (over 60% for O/E/O modules and over 30% for wavelength links), which translate into great savings in network costs.     

LTRES: A loss-tolerant reliable event sensing protocol for wireless sensor networks

Many Wireless Sensor Network (WSN) transport protocols proposed in recent studies focus on providing end-to-end reliability as in TCP. However, traditional end-to-end reliability enforcement is energy and time consuming for common loss-tolerant applications in WSNs. In this paper, a Loss-Tolerant Reliable Event Sensing protocol (LTRES) is proposed based on the particular reliability requirements for dynamic event observation in WSNs. According to the application-specific requirements, a reliable event sensing threshold at the transport layer is determined by the sink. A distributed source rate adaptation mechanism is designed, incorporating a loss rate based lightweight congestion control mechanism, to regulate the data traffic injected into the network so that the reliability requirements can be satisfied. An equation based fair rate control algorithm is designed to improve the fairness among the traffic flows sharing the congestion path. The performance evaluations show that LTRES can provide event-based loss-tolerant reliable data transport service for multiple events with short convergence time, low loss rate and high overall bandwidth utilization.     

Effect of curing method on characteristics of cold bonded fly ash aggregates

This paper discusses the influence of normal water curing, autoclaving and steam curing on the properties of a typical class-C fly ash aggregate. The 10% fines value, water absorption, and porosity of aggregates are correlated with SEM and XRD results to understand the influence of various factors and material characteristics. An increase in duration of normal water curing significantly improved the aggregate properties. Autoclaving and steam curing resulted in relatively lower enhancement in the properties as compared to normal water cured aggregate. Between the accelerated curing methods, autoclaved aggregate possessed properties closer to the normal water cured aggregate due to the dense microstructure formation. Continuation of normal water curing, after initially subjecting the aggregates to accelerated curing, exhibited only a marginal improvement in the properties.     

Root-surface caries in rats and humans: inhibition by a non-antimicrobial property of tetracyclines

The incidence of root caries has been found to increase as the population ages and as edentulism becomes less prevalent due to improved dental awareness and care, and as exposure of roots due to gingival recession has also increased in the elderly. The mechanism of root caries is thought to be mediated by both bacterial and mammalian proteases produced by plaque and the periodontal tissues, respectively. In the current study, a rat model of periodontal disease was used in which gnotobiotic rats were infected intra-orally with a periodontal pathogen (P. gingivalis). Infecting the rats with P. gingivalis increased the collagenase activity in the gingival tissue in association with severe alveolar bone loss. Treating P. gingivalis-infected rats with doxycycline or CMT-1 prevented the destruction of the periodontium by MMPs, thus preventing exposure of roots to subgingival bacterial plaque and host tissue collagenases and the subsequent development of root caries. In addition, a low-dose doxycycline (LDD, 20 mg bid, non-antimicrobial dose) for 3 months was used in humans predisposed to increased root caries as the result of heavy use of smokeless (chewing) tobacco, causing gingival recession, subgingival plaque accumulation with Gram-negative bacteria, increased gingival crevicular fluid flow (GCF), and elevated GCF collagenase. Daily administration of LDD in smokeless tobacco patients reduced the GCF collagenase and prevented the further development of root caries.     

Absorption of iodine in the neonate following topical use of povidone iodine

Topical application of povidone iodine on the umbilical cord and normal intact skin of newborn infants resulted in significantly elevated plasma iodine levels. High iodine levels were also found in two neonates who had povidone iodine applied to denuded skin. No significant alteration in thyroid function was seen. The possible toxic manifestations of high plasma iodine levels are discussed.     

Specification of skew conditions in finite element formulation

Fields exhibiting skew symmetry occur frequently in structural problems. There are many situations where non-skew-symmetric functions are conveniently used to analyse these skew fields. Specification of force and displacement conditions on the skew axis reduces the analysis to a half of the domain. The difficulty in using such conditions in an FEM analysis is their non-explicit nature. A method of overcoming this difficulty is developed using concept of generalized forces and displacements.